4 Ways to Get Efficient Rotary Air for the Summer
With high summer temperatures fast approaching please make sure your rotary compressor is prepared for the change in climate. Here are 4 tips to keep your rotary compression at peak performance for the summer.
- Lubricant and Coolant Levels
Is your lubricant and coolant low? Is it due for a fluid and filters service? Please note that running FS-Curtis synthetic fluids will reduce the heat generated by your compressor. The compressor oil serves as coolant in oil flooded rotary compressors. In rotary compressors, the compressor oil is circulated 7 or more times per minute through the machine. This is why oil levels become more critical in the summer. To be sure of the condition of your air-end and bearings we recommend an oil analysis by a distributor.
- Air Density
In the summer your compressor will have a lower performance. Make sure you install a new intake filter for the hot summer days. Please be aware that dirtier environments require more frequent intake air filter changes.
- Having Clean Compressor Air and Oil Coolers
A clean cooler may be the difference between normal operation and a high temperature shut down. Many times synthetic compressor oils are fruitless because the oil breaks down prematurely due to overheating. To protect from high acid numbers, loss of lubricity and increased viscosity, long oil change intervals must be monitored with frequent lube analysis, particularly when exposed to high ambient temperatures. Please contact your local FS-Curtis service company for a compressor “health” check.
- Hot Ambient Air and Moisture
Most lubricated, air cooled, rotary screw compressors run 100 to 110 degrees F above the ambient temperature. If your compressor room temperature is over 100 degrees F, you are already in trouble. Cross flow ventilation is advisable in non ducted compressors. If your compressor oil sump or air-end discharge is more than 120 degrees F over ambient temperature in the room, you need to find out why. FS Curtis has factory approved Air Treatment accessories to minimize moisture in your system and air lines.Posted on: May 10, 2017, by : Cameron Ballentine